Title: Research on the Morphology of Cement Hydrates
Author: Wang Peiming, Li Pingjiang and Chen Zhiyuan
pp. 1-7

Abstract

Title: Correspondence Between Plant Clinker and Laboratory Clinker
Author: M.R. Sanyal, S.K. Bandopadhyay, Vidyarthi, S.N. Ghosh
pp. 8-17

Abstract

Title: Case Studies of Discolored Surfaces of Various Building Material Exposed to Weather
Author: Stella L. Marusin
pp. 18-28

Abstract

Title: Effects of Cement Kiln Dust Insufflation and High Kiln Temperature Determined by Reflected Light Microscopy
Author: Francis C. Hoodmaker, Benjamin J. Franklin
pp. 29-37

Abstract

Title: Microstructure of High Strength and High Performance Concrete
Author: A. Grodzicka, W. Nocun-Wczelik and B. Trybalska
pp. 38-47

Abstract

Title: Microscopic Analysis of Cement/Chemical Admixture Incompatibility
Author: Stephen Dymszo, Jean L. Randolph and Shondeep L. Sarkar
pp. 47-60

Abstract

Title: Kinetics of Formation and Fine Textures of Alite in Portland Cement Clinker
Author: I. Maki, H. Kamei, M. Nakura and Y. Mizuno
pp. 61-70

Abstract

Title: Procedures for Quantitative X-Ray Diffraction
Author: G. Patino, A. Viveros and M.I. Avila
pp. 71-82

Abstract

Title: The Effects of Clinker Burning Temperature on the Degree of Belite Clustering
Author: Walter W. Rowe
pp. 83-93

Abstract

Title: Observing Three Dimensional Microscopic Structures Using Multiple Optical-Microscopic Images
Author: Kazufumi Kaneda, Nobuhiro Irie, Hiroyuki Fujii, Hideo Yamashita, Ei-ichi Tazawa, and Kenji Kawai
pp. 94-101

Abstract

Title: Characteristic Morphologies of The Interface Between Cement Paste and Fly Ash
Author: Wang Peiming, H. Scholz and Chenn Zhiyuan
pp. 102-109

Abstract

Title: Effect of Mixing Water on Morphology of C3A Hydrates
Author: Ei-ichi Tazawa, Kenji Kawai and Masaya Harada
pp. 110-118

Abstract

Title: The Influence of Microstructure in Clinker and Cement on Setting Time and Strength Development Until 28 Days
Author: Ketil Svinning and Sigrun K. Bremseth
pp. 119-138

Abstract

Title: Insufflating Shredded Tires as a Supplemental Fuel Source
Author: Matt Clarage, Tom Zmudka, Bob Hadley, Bob Jasper, Jr..
pp. 139-149

Abstract

Title: Microstructure and Reactivity of Natural Pozzolans Fly Ash and Blast Furnace Slag
Author: Caijun Shi and Robert L. Day
pp. 150-161

Abstract

Title: Improvements in XRD Analysis of Clinker Silicate Phases
Author: Alberto Saini, Nicoletta Giuliani
pp. 162-181

Abstract

Title: Microscopical Study of Coal - Cement Paste Interface
Author: Hill Caveny
pp. 182-191

Abstract

Title: Petrographic Analysis of a 100-Plus-Year-Old Sidewalk
Author: Edward F. O'Neil and J. Pete Burkes
pp. 192-210

Abstract

Title: Microscopical Analysis of Cement to Formation Bond Quality Associated with Oil Well Blends used in the Sabine Uplift
Author: Tom Dealy, Steve Johnson
pp. 211-219

Abstract

Title: Phases of Cement Paste, Cured in High Temperature - CO2 Environment
Author: Bill Caveny, Gant McPherson, Lance Brothers and Sudhir Mehta
pp. 220-231

Abstract

Title: The Influence of Burning Conditions on Alite Crystan Characteristics
Author: Sergio Luiz Centurione and Marcelo Tonhi
pp. 232-241

Abstract

Title: Microstructural Studies of Alkali-Silica Reaction in Fly Ash Concrete
Author: MDA Thomas
pp. 242-256

Abstract

Title: Effects of Amorphous and Crystalline Silica on Phase Chemistry, Microstructure and Strength of Set Cement at Elevated Temperatures
Author: S. Mehta and R. Jones, J. Chatterji and G. McPherson
pp. 257-270

Abstract

Title: Microscopic Observation of Cracks in Concrete - Sample Preparation Technique Using Dye Impregnation
Author: H. Hornain, J. Marchand, A. Ammouche, J.P. Commene and Moranville
pp. 271-282

Abstract

Title: The Influence of Microsilica on the Properties of Concrete Microstructure Produced by a New Mixing Technique
Author: H. Al-Nageim, A. Tamimi, K, Vaughan, R. Lewis
pp. 283-292

Abstract

Title: Mechanical Strength and Grindability of Portland Clinkers with Different Mineralogical Characteristics
Author: Valdir A. Zampieri and Flavio A. C. Munhoz
pp. 293-310

Abstract

Title: Petrographic Analysis of a Concrete Mortar Mixed Onboard a Recent Space Shuttle Endeavor Mission
Author: R.C. First and L. Kovach
pp. 311-329

Abstract

Title: Petrographic Thin-Section and Scanning Electron Microscope Analysis of a Mortar Fabricated in a Microgravity Environment
Author: P.T. Miller, S.A. Farrington, and L. Kovach
pp. 330-343

Abstract

Title: The Influence of Clinker Microstructure on Grindability
Author: Linda M. Hills
pp. 344-352

Abstract

Title: The ICMA Sample Exchange Program: Historical Review and Evaluation
Author: Ella Shkolnik and Linda M. Hills
pp. 353-368

Abstract

Title: Characterization and Potential Use of Ash From Waste Water Treatment Plant Incinerator in Concrete
Author: Arezki Tagnit-Hamou and Basile Tamtsia Tamboue
pp. 369-388

Abstract

Title: The Microscope: A Method and Tool to Study Lime Burning and Lime Quality
Author: Lynn A. McKenzie
pp. 389-401

Abstract

Title: Lime Particle Size: Its Effects on Feed and Products of a Hydrator Circuit
Author: Lynn A. McKenzie
pp. 402-423

Abstract